1984 Tyler 2400 Slatwall Machine, completely rebuilt in 2001,
Capacity 60" x 96" max., panel thickness 1/2" to 1-1/2"; can machine up to 200-250 panels per shift with one operator, depending on material density, thickness and the slot profile. Equipped with: (17) Router spindles, all on 3" fixed centers, spindles are driven in groups of (3) with (6) 7.5 HP - 3,450 RPM motors, buyer can add motor and spindles to run 5' x 8' sheets.
Operation: Panels remain stationary on top, pneumatically clamped in place while the bottom mounted router bank traverses the full length of the panel with a high speed return, variable feed speed control, router assembly traverses on ground & polished rails with chain drive. Panels are positioned along the 8' rear edge fence line. Overhead hold down assembly with (2) large air cylinders and (6) arms with spring loaded clamping pads hold the panel in place.
Machine was completely rebuilt in 2001 and taken out of service in November of 2006.
Includes: Allen Bradley electrical and (17) used diamond router bits, (2) extra motors, parts book and service manual and dust collection chutes attached to machine
Machine is located in central South America and can be placed under power for a reasonable connection fee which will be refunded with the purchase of the machine.
Machine runs on 220/240 Volts.
Serial # S/N: 2565-84