|
7.5 HP spindle motor with extra long spindle housing Spindle shaft is approx. 5-1/2" long to clamp cutter head Throat clearance, the distance from the fence to the cutter head max 7-1/8" The spindle head is in a fixed position Adjustable fence position, extennded linear fence in front and behind the machine table frame The cutter head can be adjusted up and down via threaded rod Climb cut to push material onto the table The feed range on Delta power feeder starts at 6.5-108 FPM with 8 different speeds. Each power feeder has (8) wheels Feeder arrangement in front and back of cutter head allows feeding of narrow material Cutter bore diameter is 30mm with keyway Dust shoot diameter is 4" Total length of conveyors included-25 ft. Voltage for v-groover and Delta power feeders is 220/60/3 Volts This machine also comes with a Herco diamond v-groove cutter. Machine was used to fabricate solid surface counter tops
|
Agricultural Equipment
))
)){kind=link}
)){kind=link}
)){kind=link}
)){kind=link}
)){kind=link}
)){kind=link}
)){kind=link}
)){kind=link}
)){kind=link}